激光切割常見材料

   我公司使用的瑞士百超激光切割設備可以切割不銹鋼，碳鋼，鋁合金，鐵板，鋼板，切割范圍是：3048mm*1524mm.

碳鋼0.5mm-30mm,不銹鋼0.5mm-20mm,鋁合金0.5mm-12mm.

不銹鋼 Stainless steel

在可以接受切割端面氧化的情況下可使用氧氣；使用氮?dú)庖缘玫綗o氧化無毛刺的邊緣，就不需要再作處理了。在板材表面涂層油膜會得到更好的穿孔效果，而不降低加工質量。

In the cut end can accept the case may be oxidized using oxygen; nitrogen is used to obtain a non-oxidizing burr-free edges, do not need to be dealt with. Coating the plate perforated film will get better results, without reducing the processing quality.

鋁 Aluminum

盡管有高反射率和熱傳導性，厚度6mm以下的鋁材可以切割，這取決于合金類型和激光器能力。當用氧切割時，切割表面粗糙而堅硬。用氮?dú)鈺r(shí)，切割表面平滑。純鋁因?yàn)槠涓呒兎浅ｋy切割，只有在系統上安裝有“反射吸收”裝置的時候才能切割鋁材。否則反射會毀壞光學組件。

銅和黃銅 Copper and brass

兩種材料都具有高反射率和非常好的熱傳導性。厚度1mm以下的黃銅可以用氮?dú)馇懈?；厚?mm以下的銅可以切割，加工氣體必須用氧氣。只有在系統上安裝有“反射吸收”裝置的時候才能切割銅和黃銅。否則反射會毀壞光學組件。

Despite the high reflectivity and thermal conductivity, aluminum less than 6mm thickness can be cut, depending on the alloy and the laser capability. When oxygen cutting, the cut surface rough and hard. With nitrogen, the cut surface is smooth. Very difficult because of its high purity aluminum cutting, only installed on the system of "reflection-absorption" means when they could cut aluminum. Otherwise it will destroy the reflective optical components.

鈦 Titanium

鈦板材用氬氣和氮?dú)庾鳛榧庸怏w來切割。其它參數可以參考鎳鉻鋼。

Titanium sheet with argon gas and nitrogen as the process gas to cut. Other parameters can refer to the nickel-chromium steel.

結構鋼 Structural steel

該材料用氧氣切割時會得到較好的結果。當用氧氣作為加工氣體時，切割邊緣會輕微氧化。對于厚度達4mm的板材，可以用氮?dú)庾鳛榧庸怏w進行高壓切割。這種情況下，切割邊緣不會被氧化。厚度在10mm以上的板材，對激光器使用特殊極板并且在加工中給工件表面涂油可以得到較好的效果。

The material with oxygen cutting may get better results. When using oxygen as the process gas, the cutting edge will be slightly oxidized. The sheet thickness of 4mm, nitrogen can be used as a process gas pressure cutting. In this case, the cutting edge is not oxidized. Thickness of 10mm or more of the plate, the laser and the use of special plates to the surface of the workpiece during machining oiled can get a better effect.文章來源：（http://m.beat-show.com  ）

新聞、技術文章、資料下載網站聲明
資料編輯人：admin
北京圣恩斯特商貿有限公司
電話： 010-87607030

• 北京激光切割加工的原理分析

  2024-01-10

• 2016年春節德航隆工激光切割加工開工通知

  2016-02-20

• 北京德航隆工承接各種材質激光切割加工業務

  2015-06-23

• 不銹鋼切割的過程中容易出現的問題

  2014-08-26

• 想要開不銹鋼加工廠應該準備或注意什么

  2014-08-14